power entry modules without line filter dd www.schurter.com/pg0 5 connectors iec appliance inlet c14 with line switch 2-pole, fuseholder 1- or 2-pole standard or medical fuse drawer c14 70 c description - panel mount: screw-on version from front or rear side - 3 functions: appliance inlet protection class i, line switch 2-pole, fuseholder for fuse-links 5 x 20 mm 1- or 2-pole - quick connect terminals 4.8 x 0.8 mm - alternative: version with line filter dd1 2 - alternative: version for snap-in mounting k m - alternative: version for pcb mounting dd2 1 approvals - vde license number: 40018283 - ul license number: e93617 characteristics - ultra-compact design. ideal for low profile designs - all single elements are already wired - fuse drawer meets requirements of medical standard iec/en 60601-1 the fuseholder is accessible from the equipment front for added safety "extra-safe" fuse drawers are available - ideal for application with high transient loads designed for standard and medical applications - qualified for use in equipment according iec/en 60950 other versions on request - solder terminals - fuse drawer 1-pole, plus spare fuse case - fuse drawer 2-pole, with shorting bar - other rocker marking - line switch 1-pole - protection class ii, 70c references general product informatio n weblinks approval s , roh s , china-roh s , mating connector s , distributor-stock- chec k , accessorie s technical data ratings iec 10 a / 250 vac; 50 hz ratings ul/csa 8 a / 250 vac; 60 hz 1 ? dielectric strength > 2.5 kvac between l-n > 3 kvac between l/n-pe (1 min/50 hz) allowable operation temp. -25 c to 85 c degree of protection from front side ip 40 acc. to iec 60529 protection class suitable for appliances with protection class 1 acc. to iec 61140 terminal quick connect terminals 4.8 x 0.8 mm panel thickness s screw-on mounting: max 8 mm mounting screw torque max 0.5 nm rear side mounting: max 2 mm material: housing thermoplastic, black, ul 94v-0 appliance inlet c14 acc. to iec/en 60320-1 ul 498, csa c22.2 no. 42 (for cold conditions) pin-temperature 70 c, 10 a, protection class 1 fuseholder 1 or 2 pole, shocksafe category pc2 acc. to iec 60127-6, for fuse-links 5 x 20 mm rated power acceptance @ ta 23 c 5 x 20: 2 w (1 pole)/ 1.6 w (2-pole) per pole power acceptance @ ta > 23c admissible power acceptance at hig - her ambient temperature see derating curves line switch rocker switch 2-pole, non-illuminated or illuminated, acc. to iec 61058-1 technical detail s 1) with cover 7 a, without cover 8 a
power entry modules without line filter dd www.schurter.com/pg0 5 connectors dimensions 65 mm screw version 46.7 30.5 27.7 3.25 10.3 56 65 0.10 27.1 90 30 2.5 29.8 10.6 6 33.1 5 28.1 56 47.1 31.5 0.15 0.10 r 1 0.05 3.4 2 pe n l 6 31.6 46.6 22.9 4 2 2a a) b) a) view with cover b) view without cover diagrams non illuminated 1) line 2) load illuminated 1) line 2) load derating curves 1-pole admissible power acceptance in watt 0 2 0 4 0 6 0 8 0 100 i = < < i n i = 0.7 i n i = 1.0 i n 2.0 1.5 1.0 0.5 0.0 ambient air temperature ta c 2-pole admissible power acceptance in watt per pole 0 2 0 4 0 6 0 8 0 100 0.2 0.0 i = < < i n i = 0.7 i n i = 1.0 i n 1.6 0.6 0.4 0.8 1.2 1.0 1.4 ambient air temperature ta c variants fuse drawer must be ordered separately (see accessories). fingergrip and extra safe. the same drawer as used by type kea. fuseholder line switch illumination color cover ) order number 1-pole 2-pole non-illuminated - dd11.0111.1110 1-pole 2-pole illuminated red dd11.0113.1110 1-pole 2-pole illuminated green dd11.0114.1110 2-pole 2-pole non-illuminated - dd11.0121.1110 2-pole 2-pole illuminated red dd11.0123.1110 2-pole 2-pole illuminated green dd11.0124.1110 1-pole 2-pole non-illuminated - l dd11.0111.1111 1-pole 2-pole illuminated red l dd11.0113.1111 1-pole 2-pole illuminated green l dd11.0114.1111
power entry modules without line filter dd www.schurter.com/pg0 5 connectors 2-pole 2-pole non-illuminated - l dd11.0121.1111 2-pole 2-pole illuminated red l dd11.0123.1111 2-pole 2-pole illuminated green l dd11.0124.1111 1) current rating ul: with cover 7 a, without cover 8 a packaging unit 50 pcs required accessor y description fusedrawer 2 fusedrawer with and without voltage selector insert fingergrip, 2-pole 4301.1401 extra-safe, 2-pole 4301.1403 fingergrip, 1-pole 4301.1405 extra-safe, 1-pole 4301.1407 ... accessorie s cord retaining kit s cord retaining strain relief flat head, a 4700.0001 mating outlets/connector s category / description appliance outlet overview complet e iec appliance outlet f, screw-on mounting, front side, solder terminal 478 7 iec appliance outlet f, snap-in mounting, front side, solder or quick-connect terminal 478 8 iec appliance outlet f or h, screw-on mounting, front side, solder, pcb or quick-connect terminal 509 1 iec appliance outlet f or h, screw-on mounting, front side, solder or quick-connect terminal 509 2 appliance outlet further types to dd1 1 connector overview complet e iec connector c15, rewireable, straight 010 1 iec connector c15a, rewireable, straight 010 2 iec connector c15a, rewireable, straight 0102- g iec connector c15a, rewireable, angled 011 2 iec connector c13, rewireable, angled 401 2 connector further types to dd1 1 ... power cord overview complet e power cord with iec connector c13, angled 031 1 power cord with iec connector c13, angled 301 1 power cord with iec connector c13, angled 301 2 power cord with iec connector c13, angled 301 3 power cord with iec connector c13 302 0 power cord further types to dd1 1 ... the specifications, descriptions and illustrations indicated in this document are based on current information. all content is subject to modifications and amendments.
|
